top of page
Search

How to Choose the Right Ellman Surgitron Handpiece

Nov 14
3 min read

A Surgitron generator is only as dependable as the handpiece in your hand. The handpiece carries energy to the electrode, takes the most wear in daily use and is one of the parts clinics ask us about most often. Before you order a replacement or a spare, a few quick checks will help you get the right one the first time.


Start With Your Generator Model


Ellman handpieces are not universal. The handpiece used on a Surgitron Dual RF is not the one used on the older Surgitron FFPF family, so the first step is to confirm the exact model printed on your unit's label.

  • Surgitron Dual RF family: finger switch handpieces such as the 3-button IEC-3FHPB type, or foot-controlled handpieces such as the IEC-HP1 and IEC-XLP1 types. Depending on the handpiece, listings also cover the Palleve S5, Surgitron EMC and AcuSect.

  • Surgitron FFPF family (FFPF blue, FFPF EMC and Dento Surg 90FFP): a footswitch-controlled handpiece equivalent to Ellman part IEC-XHP1.

If the label is hard to read, send us a photo of the front panel and the rating label. That is usually enough for our team to confirm the match.


Finger Switch or Foot-Controlled?


Handpieces activate in one of two ways, and the right choice usually comes down to how your team already works.

Staying with the activation style your staff already know avoids retraining and keeps procedure days running smoothly.


OEM or Compatible: What Is the Difference?


We carry both. OEM handpieces are genuine Ellman parts. Compatible handpieces are IMEDTECH brand and are listed as "Compatible with Ellman Surgitron" for specific models, so you always know which is which. Both types in our store are reusable. Choose based on your budget, availability and your facility's purchasing policy, and always check the model list on the product page.


Check the Electrode Shaft Size


The electrode and the handpiece must share the same shaft size. Most Surgitron electrodes in our store, from single needles to the S10B Standard Electrode Set, use a standard 1/16 inch shaft. Our compatible FFPF handpiece and IEC-XLP1 handpiece accept both 1/16 inch and 3/32 inch shafts. If you mix electrodes from different suppliers, confirm the shaft size before your next procedure day.


Handpiece Care Tips That Extend Service Life


  • Clean and sterilize only as described in the manufacturer's instructions for your handpiece.

  • Before each use, check the full length of the cable for cuts, cracks or kinks, and look at the connector pins for bending or corrosion.

  • Coil the cable loosely for storage. Wrapping it tightly around the handpiece stresses the wires where they enter the body.

  • Seat the electrode fully and, on locking-chuck models, tighten the chuck before activating.

  • If activation becomes intermittent or a button sticks, take the handpiece out of service and have it evaluated instead of continuing to use it.

  • Keep a spare handpiece on the shelf, so one failed cable does not cancel a full clinic day.


Frequently Asked Questions


Which handpiece do I need for a Surgitron Dual RF?

Check whether your setup uses buttons on the handpiece or a footswitch. For finger switch activation, look at the 3-button IEC-3FHPB compatible handpiece. For footswitch activation, the OEM IEC-HP1 and the compatible IEC-XLP1 are both listed for the Dual RF.

Will a Surgitron FFPF handpiece fit my Dual RF?

No. The FFPF handpiece in our store is listed for the FFPF, FFPF EMC and Dento Surg 90FFP. For a Dual RF, choose a handpiece listed for the Dual RF.

Will my current electrodes fit a new handpiece?

In most cases, yes. Standard Surgitron electrodes use a 1/16 inch shaft. Check the shaft sizes listed on the handpiece page before you order.

Can you ship a handpiece outside the United States?

Yes. Send your full shipping address to sales@imedtechcorp.com and we will confirm shipping cost, estimated delivery time and payment options before you order.

What warranty comes with a Surgitron generator?

Refurbished equipment includes a 6-month warranty and new equipment includes a 1-year warranty. Extended warranty is available for equipment.


Find the Right Handpiece for Your Surgitron


Browse our finger switch and foot-controlled handpieces, or send us your generator model and a photo of your current handpiece. Email sales@imedtechcorp.com or call 1-866-370-2722, and our team will confirm the right part before you buy.

 
 
 

Comments


bottom of page