top of page
Search

Receiving Refurbished Medical Equipment: A Checklist

6 days ago
4 min read

A refurbished vital signs monitor, ECG system or patient monitor can stretch your equipment budget a long way, but the first hour after delivery matters. A careful receiving check helps you catch shipping damage, missing hardware or a loose fitting while it is still quick and easy to fix.


We hear the same questions every week from clinics and biomedical technicians, so we turned them into a simple checklist for every delivery.


Before You Open Anything


  • Count the boxes against your tracking information. Larger orders, such as a monitor with a rolling stand, are often packed separately and can arrive on different days.

  • Inspect every carton for crushed corners, punctures or water damage. If you see damage, take photos before you open it.

  • Keep all packaging until testing is finished in case the device needs to travel for service.


Unpack and Check the Contents


Compare what arrived with the product listing and your invoice, not with what you expected from a previous purchase. Configurations vary, so check for:


  • The main unit and its power supply or power cord, plus the battery if one is listed.

  • Every accessory named in the listing, such as an SpO2 sensor, NIBP hose and cuff, temperature probe or ECG patient cable.

  • Mounting hardware for stands, carts or wall mounts. On some units the screws used to attach the stand are already installed on the back of the device, so look there before assuming they are missing.

  • Software, license keys and interface cables for PC-based systems such as digital ECG and spirometry.


Tip: if something seems to be missing, take a clear photo of the contents and of the back of the device and send it to our team. Photos help us identify the exact part much faster.


Assemble Stands and Mounts Correctly


  • Follow the manufacturer's assembly instructions and confirm the mounting plate matches your monitor model.

  • Tighten all hardware securely, then gently check that the monitor does not wobble on the pole or bracket.

  • Lock and unlock each caster on a rolling stand to make sure the brakes engage.


Power Up and Run a Basic Function Check


  • If the box sat in a cold truck or loading dock, let the device reach room temperature before powering it on to avoid condensation inside.

  • Charge the battery fully as described in the operator's manual before relying on battery power.

  • Power on and watch the start-up self-test. Note any error codes, and set the correct date and time.

  • Connect each accessory and confirm the monitor recognizes it: an SpO2 reading appears, the NIBP cuff inflates and deflates, and the temperature probe is detected.

  • Listen for air leaks at the NIBP hose connector. If the cuff will not hold pressure, check that the connector is fully seated and that the hose and cuff are the right type for your monitor.

  • Before clinical use, have your biomedical team complete your facility's incoming inspection and electrical safety testing according to your own policies.


Keep Records From Day One


Write down the serial number, the date received and who inspected the device, and file the invoice where your biomed team can find it. This is your warranty start point. Refurbished equipment from IMEDTECH comes with a 6-month warranty and new equipment with a 1-year warranty, and extended warranty is available for equipment. Add the device to your preventive maintenance schedule right away so it is not forgotten.


Frequently Asked Questions


Why did my order arrive in more than one box?

Larger items, such as a vital signs monitor and its rolling stand, are often packed and shipped separately. Check the tracking information for each package. If one box seems to be missing or has stopped moving, contact us and our team will follow up with the carrier.


The mounting screws for my stand seem to be missing. What should I do?

First check the back of the device. On some units, the screws used to attach the monitor to the stand are already installed and simply need to be removed and reused. If they are not there, send us a photo of the back of the device and we will help you get the right hardware.


My blood pressure cuff connection keeps losing air. Is the monitor faulty?

Not necessarily. Make sure the hose connector is fully seated, and check the hose and cuff for cracks or worn fittings. If the leak continues, record a short video of the hose and connector and send it to us so we can identify the right replacement part.


What warranty comes with my equipment?

Refurbished equipment includes a 6-month warranty and new equipment includes a 1-year warranty. Extended warranty is available for equipment. Keep your invoice and serial number on file in case you need support.


Ready to Equip Your Clinic?


Browse refurbished and new vital signs monitors such as the Welch Allyn 300 Series, the Welch Allyn Connex 6500 and the Welch Allyn Connex Spot 73WE-B, along with compatible accessories like the reusable adult SpO2 finger sensor, at imedtechcorp.com.


Have a question about a delivery, a missing part or a configuration? Email sales@imedtechcorp.com or call 1-866-370-2722 and our team will be glad to help.


 
 
 

Comments


bottom of page